The SaluTron^® D6 is a combination gauge with 
3 Fe- and 2 NFe interchangeable probes.

With Fe-probes (F400, F1 and F10) you can measure non-magnetic coatings such as paints, plastics, chromium, copper, zinc, enamel, etc. on metal substrates as steel or iron.

With the NFe-probes (N1 and CN02) you can measure non-conductive layers such as paints, enamels, plastics, rubber, glass, paper, etc. on non-magnetic metal substrates as aluminum, copper, brass, zinc and certain grades of stainless steel. You can also measure anodized aluminum.

Measuring Features:

• Measuring range of 0-1250 micron :F1 standard probe
• Measuring range of 0-10 mm :F10 special probe)
• High accuracy
• Switch between mil and micron
• Upper and lower limits can be preset; with visual and audible alarm when exceeding
• 2 measuring modes: continuing mode and single mode
• 2 operation modes: direct mode with 99 storage places and batch mode with 495 locations (5 blocks with 99 values each)
• Automatic recognition of the probes
• Quick calibration and zeroing of the instrument
• 2 methods for calibration; error system of the probe can be corrected with basic calibration method

Functions:

• Statistic values: mean, minimum, maximum, number of measurements, standard deviation
• Switch between manual or automatic memory
• Delete function: single data or all data in memory
• Analysis of measured values via histogram
• Acoustic signal after each measurement / buttons beep adjustable
• Backlight
• Low battery indicator
• Automatic or manual shutdown
• Transfer of results to PC

شرکت پازش صنعت ساحل جنوب شرق ارائه دهنده تجهیزات بازرسی رنگ و لعاب 

دستگاه‌های ضخامت سنج رنگ و روک با برند و مدل‌های مختلف

دستگاه‌های تست چسبندگی رنگ (کراس کات)

دستگاه‌های تست ضربه

دستگاه تست خمش

دستگاه براقیت سنج (تک زاویه ای و سه زاویه ای )

دستگاه تست نقطه شبتم

دستگاه‌های تست زبری و تست سند پلاست

جهت سفارش با ما تماس بگیرید

03434290600  -  02144432759